Crane Licensing
Course Details
Pro-Lift Training, offers Crane High Risk Work Licensing training for the below courses.
This training can be completed at our training facility or at work site locations.
Course Code
Course Description
CV*
TLILIC0002
Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)
CB
TLILIC0006
Licence to operate a bridge and gantry crane
CT
CPCCLTC4001A
Licence to operate a tower crane
CS
CPCCLTC4002A
Licence to operate a self-erecting tower crane
CN*
TLILIC3008
Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
C2*
TLILIC0010
Licence to operate a slewing mobile crane (up to 20 tonnes)
C6*
TLILIC0013
Licence to operate a slewing mobile crane (up to 60 tonnes)
C1*
TLILIC0014
Licence to operate a slewing mobile crane (up to 100 tonnes)
C0*
TLILIC0015
Licence to operate a slewing mobile crane (over 100 tonnes)
LEGEND
- Course Codes marked in ORANGE have training prerequisites that must be completed before enrolment. Information on these requirements can be found in the FAQ below.
- Course codes that are marked with an asterix (*) have CSQ Funding available for eligible persons – Contact our team to find out more.
Frequently Asked Questions
On successful completion and assessed as competent you will receive a Statement of Attainment issued by Pro-Lift Training and Assessment Services RTO 40817 for the crane licence completed.
A short literacy and numeracy test will be required to be completed by all students.
Please note: In the industry, this certification is also referred to as a ‘Crane Ticket’ or a ‘Franna Ticket’ or a ‘Crane Licence’ or a ‘Franna Licence’.
Delivery Mode
Theory and practical face-to-face training and assessment.
Minimum 5 Days Intensive Training for all Crane Licences
Please Note: Excludes TLILIC0002 – Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) with a duration of 3 days.
Training Prerequisites Apply For The Following Courses
CV Vehicle Loading Crane (TLILIC0002)
- Must hold HRWL to perform dogging
CB Bridge and Gantry Crane (TLILIC0006)
- Must hold HRWL to perform dogging
CN Non-Slewing Crane (TLILIC3008)
- Must hold HRWL to perform dogging
C2 Slewing Crane (TLILIC0010)
- Must hold HRWL to perform dogging
C6 Slewing Crane (TLILIC0013)
- Must hold HRWL to perform dogging
C1 Slewing Crane (TLILIC0014)
- Must hold HRWL to perform dogging
- Must hold HRWL to operate a slewing mobile crane (up to 60 Tonnes) and current industry experience competently operating crane for at least 2 years
C0 Slewing Crane (TLILIC0015)
- Must hold HRWL to perform dogging
- Must hold HRWL to operate a slewing mobile crane (up to 60 Tonnes) and current industry experience competently operating crane for at least 2 years
These courses are completed upon request only.
To express your interest for this course, please submit your details using the form on this page or contact us.
Training.gov.au Fact Sheets
CV – https://training.gov.au/Training/Details/TLILIC0002
CB – https://training.gov.au/Training/Details/TLILIC0006
CT – https://training.gov.au/Training/Details/CPCCLTC4001A
CS – https://training.gov.au/Training/Details/CPCCLTC4002A
CN – https://training.gov.au/Training/Details/TLILIC0008
C2 – https://training.gov.au/Training/Details/TLILIC0010
C6 – https://training.gov.au/Training/Details/TLILIC0013
C1 – https://training.gov.au/Training/Details/TLILIC0014
C0 – https://training.gov.au/Training/Details/TLILIC0015
Worksafe QLD Information
Crane Encompassment Details – https://www.worksafe.qld.gov.au/licensing-and-registrations/work-health-and-safety-licences/what-licence-do-i-need/cranes-and-hoists/crane-encompassment-and-high-risk-work
Safework Australia Guides
General Guide to Cranes – https://www.safeworkaustralia.gov.au/system/files/documents/1703/general-guide-for-cranes.pdf
- These courses are run upon request only
To express your interest for these courses, please submit your details below.